Agilent Technologies 4155C User Manual page 174

Print/Plot Function
Saving Screen Images
To save the screen images:
1. Display the screen that you want to print out, then press:
a. the front-panel green key
b. Plot/Print key
The 4155C/4156C displays the SCREEN DUMP dialog box.
SCREEN DUMP
*DESTINATION
*OUTPUT REGION
UPPER LEFT
LOWER RIGHT
In this dialog box, three softkeys are available:
PRINT/PLOT
PR/PL SETUP
EXIT
2. To set the DESTINATION to FILE, select FILE softkey.
3. Enter the file name in the FILE NAME field.
To save a file to a diskette in the built-in flexible disk drive, the file name must
be:
• a maximum of 8 characters for DOS format
• a maximum of 6 characters for HP LIF format (Do not use "_" as the last
character of the filename.)
To save a file to the network drive, the file name can be a maximum of 36
characters. The file name and directory path can be a maximum of 58 characters.
5-22
FILE
X 5% Y 0%
X 100% Y 100%
Executes the screen image save.
Displays the PRINT/PLOT SETUP screen. To close the
PRINT/PLOT SETUP screen, select EXIT softkey.
Closes the SCREEN DUMP dialog box and quits the
print/plot function.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
*FILE NAME
*LANGUAGE *RESOLUTION
PCL 75 DPI