Loading Setup Or Results Data - Agilent Technologies 4155C User Manual

File Operations

Loading Setup or Results Data

Loading Setup or Results Data
1. To load data from a file in the present mass storage device, press Get key.
2. To change the mass storage device, do the following:
a. Press System key.
b. Select FILER softkey to display the SYSTEM: FILER screen.
c. Specify the new mass storage device.
d. Select GET softkey.
FUNCTION:GET
NAME
TYPE
3. In the NAME field, do one of following.
• To load a file from a diskette or a network file system:
a. Select FILE CATALOG softkey.
b. Move the cursor to the desired file name using the rotary knob.
c. Press SELECT softkey. This sets the NAME and TYPE entries.
• To load data from internal memory, select MEM1, MEM2, MEM3 or MEM4
softkey.
4. Select EXECUTE softkey.
5. Select EXIT softkey.
4-14 Agilent 4155C/4156C User's Guide Vol.1, Edition 11