Agilent Technologies 4155C User Manual page 29

• MEASUREMENT key group
Measurement keys control the measurement, stress, and integration time.
Single key
key
Repeat
key
Append
key
Stop
key
Standby
key
Stress
, ,
Short Medium
and keys
Long
• MEASUREMENT indicator
This indicator lights when the 4155C/4156C is in the measurement state.
• HIGH VOLTAGE indicator
This indicator lights when a unit forces more than 40 V.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
Executes the measurement once, then returns to the idle
state (or standby state if standby is enabled for the channel)
after the measurement is finished. Measurement data is
updated, so data of previous measurement is lost. Pressing
the green key, then
Single
measurement.
Starts and repeats the measurement continuously.
Measurement data is updated, so data of previous
measurement is lost. To stop the measurement, press
key.
Executes the measurement once, then returns to idle state
(or standby state if standby is enabled for the channel) after
measurement is finished. Measurement data is appended to
data of previous measurement.
Stops the measurement or stress. Standby enabled channels
return to standby state, and other channels return to idle
state.
Toggles between the standby enabled (Standby indicator is
lit) and disabled states. If Standby indicator is lit, then
STBY ON channels change to standby state (instead of idle
state) when measurement or stress finishes.
affect on standby state.
Forces the specified stress. The guide around this key
prevents you from accidently pressing the
Sets the integration time to SHORT, MEDIUM, or LONG,
respectively.
Introducing the 4155C/4156C
Front View of the 4155C/4156C
key starts knob sweep
Stop
key.
Stress
Stop
key has no
1-9