Printing/Plotting Setup Data Lists - Agilent Technologies 4155C User Manual

NOTE

Printing/Plotting Setup Data Lists

This section describes how to print/plot the data list on the setup screens, except for
the GRAPH/LIST and KNOB SWEEP screens.
Before beginning to print/plot, check the following:
• SYSTEM: MISCELLANEOUS screen
This screen specifies the 4155C/4156C control mode, GPIB address, output
equipment, and so on. Set all the entry fields properly. For more information, see
Setup Screen Reference manual.
• SYSTEM: PRINT/PLOT SETUP screen
This screen specifies the printer/plotter, information to print/plot, paper size, and
so on. Set all the entry fields properly. For more information, see Setup Screen
Reference manual.
The following entry fields must be set:
Entry Field
DESTINATION
FORM FEED
LINE
COLUMN
COLOR/B/W
PAPER
OUTPUT ITEM
INIT STRING
TRAILER STRING
Multiple Outputs
If you want to print two or more images on one sheet of paper, set the FORM FEED
entry field to DISABLE for all images, except the last image. Set ENABLE for the
last image.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
Printing/Plotting Setup Data Lists
HP-GL PCL
√ √
√ √
√ √
√
√ √
√ √
√ √
√ √
√ √
Print/Plot Function
HR PCL
√
√
√
√
√
√
√
√
√
5-11