Table of Contents
Advertisement
7. In the TARGET NAME field, do one of the following:
•
To copy a file to a new file, enter the new file name.
•
a maximum of 6 characters for an HP LIF diskette. Do not use "_" as the
last character of the filename.
•
a maximum of 8 characters for a DOS diskette.
•
To store data in a new file on the network file system, enter a file name,
36 characters maximum. The file name and directory path combined can
be 58 characters maximum.
•
To copy a file to an existing file:
a. Select FILE CATALOG softkey.
b. Move the pointer to the desired file name using the rotary knob.
c. Press SELECT TARGET softkey. This sets the TARGET NAME entry.
•
To copy a file to internal memory, select MEM1, MEM2, MEM3 or MEM4
softkey.
8. Select EXECUTE softkey.
9. If you are copying a file from one diskette to another, follow these on-screen
instructions.
Insert Source Diskette.
Continue? (YES / NO)
YES
Insert the source diskette in the disk drive, then select this softkey.
NO
Suspends the copy operation.
Insert Target Diskette.
Continue? (YES / NO)
YES
Insert the target diskette in the disk drive, then select this softkey.
NO
Suspends the copy operation.
10. Select EXIT softkey.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
File Operations
Copying a File
4-19
Hide quick links:
Advertisement
Table of Contents
