Setting Up Nfs Server - Agilent Technologies 4155C User Manual

Table 3-9

Setting Up NFS Server

This section describes how to set up the NFS server using the Microsoft Windows
Services for UNIX software. Before starting the procedure, set up the network of the
computer as described in "Setting Up Network for Windows XP" on page 3-21,
"Setting Up Network for Windows 2000" on page 3-25, or "Setting Up Network for
Windows NT" on page 3-30.
This section provides setup procedures using the Services for UNIX 3.5 software.
Perform step 1 to step 9 to set up the NFS server.
Perform step 10 to export a network file system.
Check List of Setting up NFS Server
Steps
Step 1. Preparation
Step 2. Installation
Step 3. Server for NFS
Step 4. Group Registration
Step 5. User Registration
Step 6. User Mapping Configuration
Step 7. User Name Mapping
Step 8. Group Name Mapping
Step 9. Map Maintenance
Step 10. Export (Windows Explorer)
a. The password file and group file are used for the user mapping between
a NFS server and a NFS client.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
Connecting to Network
If You Use a Windows PC
Summary
You add Windows logon accounts, and
create password file and group file.
You install Services for UNIX.
You set up Server for NFS menu.
You register groups.
You register users.
You specify password file and group file.
You set user mapping.
You set group mapping.
You save user name mapping data.
You export a network file system.
a
3-35