Measurement Unit Configurations - Agilent Technologies 4155C User Manual

Introducing the 4155C/4156C

Measurement Unit Configurations

Measurement Unit Configurations
Agilent 4155C, 4156C, and 41501A/B are frames that contain the measurement
units. The measurement units are installed before the product is shipped from
factory. User cannot reconfigure the installed units.
•
•
•
Table 1-1 Configuration of the 41501A/B
One GNDU
Two PGUs
Two MPSMUs
One HPSMU
1-6
Agilent 4155C configuration:
• four medium power source monitor units (MPSMUs).
• two voltage source units (VSUs).
• two voltage monitor units (VMUs).
Agilent 4156C configuration:
• four high resolution source monitor units (HRSMUs).
• two voltage source units (VSUs).
• two voltage monitor units (VMUs).
The 4156C has higher measurement resolution. For details about measurement
range and resolution, refer to User's Guide: Measurement and Analysis.
Agilent 41501A/B configuration:
The 41501A/B is attached to the 4155C/4156C at your site. See Chapter 2 on
how to install the 41501A/B.
The 41501A/B contains a ground unit (GNDU). In addition, you specify an
option number according to desired units as follows:
Unit
a
a. HPSMU: high power source monitor unit
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
Agilent 41501A/B Option Item
402 410 412
yes yes yes
yes yes
yes yes
420 422
yes yes
yes
yes yes