Agilent Technologies 4155C User Manual page 113

Figure 3-12
Add/Remove Programs
2
Add/Remove
Windows
6
Close
Components
Step 3.
Step 4.
NOTE
Confirming Print Services
Windows Components Wizard
Components
Message Queuing Services
Networking Services
Other Network File and Print Services
Script Debugger
4
Details
Services
1. Double-click the Administrative Tools icon to open the Administrative Tools
window.
2. Double-click the Services icon to open the Services window.
3. Check Status and Startup Type of the TCP/IP Print Server.
If they are not set as shown below, double-click TCP/IP Print Server, and set as
shown below:
Name
TCP/IP Print Server
4. Close the Services window.
Add Printer
If a remote printer is not defined in the computer, or you want to add a new printer,
use the Add Printer Wizard. This wizard will guide you in adding a new printer. Step
through the Add Printer Wizard. You will not need special instruction. Here is how
to open the Add Printer Wizard.
1. Click Start, Settings, and Printers to open the Printers folder.
2. Double-click the Add Printer icon. The Add Printer Wizard opens.
Do not forget sharing the printer, and its share name used to specify the printer. For
the share name, a maximum 15 alphanumeric characters is available. The first
character must be a letter of the alphabet.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
If You Use a Windows PC
5
Other Network Services
Subcomponents of Other Network Services
3
Next Cancel
Status
Started
Connecting to Network
Print Services for Unix
Cancel
OK
Startup Type
Automatic
3-29