Initializing A Diskette - Agilent Technologies 4155C User Manual

File Operations

Initializing a Diskette

Initializing a Diskette
1. Press System key.
2. Select FILER softkey to display the SYSTEM: FILER screen.
3. Move the pointer to the DISK field.
4. Select FLOPPY softkey.
5. Select DISK OPERATION softkey to display the setup fields.
6. In the DISK OPERATION field, select DISK INIT softkey.
7. In the FORMAT field, select DOS softkey or HP LIF softkey.
8. (Optional) In the VOLUME NAME field, enter a volume name.
9. Select EXECUTE softkey.
10. After the confirmation message, insert a diskette in the flexible disk drive, then
select:
• YES softkey to initialize the diskette.
• NO softkey to cancel.
The PROGRESS STATUS field shows what percentage of the initialization is
completed.
11. Select EXIT softkey.
4-22 Agilent 4155C/4156C User's Guide Vol.1, Edition 11