Changing The Working Directory - Agilent Technologies 4155C User Manual

Changing the Working Directory

1. Press System key.
2. Select FILER softkey to display the SYSTEM: FILER screen.
3. Specify the mass storage device as a network file system.
4. Select FILE CATALOG softkey.
5. To specify the working directory:
a. Move the pointer to the desired directory using the rotary knob.
b. Select CHANGE DIRECTORY softkey.
6. To change the working directory to the upper level, select one of the following:
UPPER DIR Moves to the directory one level higher than the current directory.
ROOT DIR Moves to the root directory.
7. Select EXIT FILE CATALOG softkey.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
File Operations
Changing the Working Directory
4-21