Hardware/Software Required - Agilent Technologies 4155C User Manual

NOTE

Hardware/Software Required

You need the hardware and software listed below:
• Computer with the following specifications
• Available hard disk space: 19 MB to 275 MB. Depends on the components
installed from the Services for UNIX software package.
• Memory: 16 MB or more.
• Network adapter: Ethernet IEEE 802.3, 10BASE-T.
• Operating system:
For use of Services for UNIX 3.5:
Windows Server 2003, Windows 2000 Server with SP3 or SP4,
Windows 2000 Professional SP3 or SP4, or Windows XP Professional with
SP1 (SP2 can be used under a condition of "personal firewall off").
For use of Services for UNIX 3.0:
Windows XP Professional SP1 (with Internet Explorer 6.0 or later) or
Windows 2000 Professional SP3 (with Internet Explorer 6.0 or later).
For use of Services for UNIX 2.0:
Windows 2000 Professional (with Internet Explorer 4.01 or later) or
Windows NT 4.0 SP4 or later (with Internet Explorer 4.01 or later).
• LAN cable (1 ea., straight or cross)
Use straight cable for connecting the computer to a network.
Use cross cable for connecting the computer to the 4155C/4156C directly.
• CD-ROM drive
• Operating system CD-ROM
• Services for UNIX 2.0, 3.0, or 3.5
Services for UNIX 3.5 supports the NTFS file system only. And the FAT file
system is not supported.
For the requirements and details about Services for UNIX, visit the following URL:
http://www.microsoft.com/windows/sfu/
Services for UNIX is required to set up the NFS server. If you set up the print server
only, you do not need Services for UNIX.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
Connecting to Network
If You Use a Windows PC
3-19