Required Equipment - Agilent Technologies 4286A User Manual

Required Equipment

To perform all the steps in this quick start, the following equipment is required:
4286A RF LCR meter
Test Head
Fixture Stand
Calibration Kit
Test Fixture
16191A Side Electrode SMD Test Fixture, or
16192A Parallel Electrode SMD Test Fixture, or
16193A Small Side Electrode SMD Test Fixture
Shorting Device Set (Included with 16191A, 16192A, 16193A, and Option 004 Working
Standard Set)
Tweezers (Included with 16191A, 16192A, and 16193A)
Device Under Test (DUT) (A chip inductor is used in this guide.)
Figure 3-2. Required Equipment
Basic Measurement Procedures 3-3