Table of Contents
Advertisement
Step 10.
Connecting to Network
If You Use a Windows PC
Export (Windows Explorer)
1. Open Windows Explorer.
2. Create a folder to export if you need.
3. Place the mouse pointer on a folder to export, for example, D4156, then click the
right mouse button to display a pop-up menu.
4. Click Properties on the pop-up menu to open the properties dialog box for the
folder.
5. Click the NFS Sharing tab.
Perform the following steps to specify the share name and permissions.
a. Select the Share this folder radio button.
b. Enter Share name, for example, DATA4156.
This value will be set to the 4155C/4156C to specify the network file system
to mount. It must be a maximum 58 alphanumeric characters.
c. Click Permissions to open the NFS Share Permissions dialog box.
d. Repeat the following steps to add NFS clients for the folder.
1. Click Add to open the Add Clients and ClientGroups dialog box.
2. Enter the computer name of NFS client in the Add Names list box.
For example, enter ANALYZER for the 4155C/4156C.
3. Click OK.
e. Set Type of Access as you wish.
For example, if you want to allow the read write permission to ANALYZER
only, set as shown below:
ALL MACHINES
ANALYZER
f. Click OK.
6. Click OK of the dialog box.
3-42
Name
Agilent 4155C/4156C User's Guide Vol.1, Edition 11
Type of Access
Read-Only
Read-Write
Hide quick links:
Advertisement
Table of Contents
