Table of Contents
Advertisement
MSD-72 Series User's Guide
9.10 RS-232C
The RS-232C port of the MSD can output communication command control from PCs and can output control
command to external devices from the MSD. The operation mode will be switched according to "9.10.2
RS-232C operation mode".
9.10.1 RS-232C communication setting
Top → COM PORT → PARAMETERS
Menu
Setting for
Each RS-232C port
Setting value [Table 9.16] RS-232C setting items
Setting item
Baud rate [bps]
Data bit length [bit]
Parity check
Stop bit [bit]
You can set RS-232C communication.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
9.10.2 RS-232C operation mode
Top → COM PORT → FUNCTION
Menu
Setting for
Each RS-232C port
Setting value RECEIVER [Default], TRANSMITTER
You can set the operation mode to "RECEIVER" mode in which the MSD is controlled externally or
"TRANSMITTER" mode in which the MSD controls peripheral devices.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
92
[Table 9.16] RS-232C setting items
Setting value
4800, 9600, 19200, 38400
8, 7
NONE, EVEN, ODD
1, 2
【See: 9.12 Setting control command】
Default
9600
8
NONE
1
Advertisement
Table of Contents
