Rs-232C; Rs-232C Communication Setting; Rs-232C Operation Mode - IDK MSD-6203 User Manual

9.12 RS-232C

The RS-232C connector of the MSD can output communication command control from PCs and control
command to external devices from the MSD. The operation mode will be switched according to "9.12.2

RS-232C operation mode".

9.12.1 RS-232C communication setting

Menu Top→COM PORT→PARAMETERS
Setting for RS-232C channel
Setting value [Table 9.19] RS-232C setting items
Setting item
Baud rate [bps]
Data bit length [bit]
Parity check
Stop bit [bit]
You can set the RS-232C communication.
Press the MENU/SET key to apply the setting.
9.12.2 RS-232C operation mode
Menu Top→COM PORT→FUNCTION
Setting for RS-232C channel
Setting value RECEIVER [Default], TRANSMITTER
You can set the operation mode to "RECEIVER" mode in which the MSD is controlled externally or
"TRANSMITTER" mode in which the MSD controls peripheral devices.
Press the MENU/SET key to apply the setting.
[Table 9.20] RS-232C setting items
Setting value
4800, 9600, 19200, 38400
8, 7
NONE, EVEN, ODD
1, 2
MSD-62 Series User's Guide
【See: 9.14 Setting control command】
Default
9600
8
NONE
1
111