Download  Print this page

Advertisement

Setup location

Set up the machine in a location that meets the following requirements.
• Position the machine a minimum of 50 mm (2 inches) away from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk or stand.
• Use a surface that can support the weight of the machine (about 42.5 kg (94 lb))
• Allow open space around the ventilation slots found on the rear underside of the machine
• In order to prevent malfunctions or damage, do not set up the machine in a location exposed to the
following conditions.
Insufficient space
Objects within the moving range of the
embroidery frame
Extremely high or extremely low
temperatures. The operating environment
should be between
5 °C (40 °F) and 40 °C (104°F).
Note
• For your safety: Since the machine weighs approximately 42.5 kg (94 lb), do not set it up on an
unstable table or desk.
785 mm
(31 inches)
More than
210 mm
(8-1/4 inches)
CAUTION
Liquids, such as water
Direct sunlight
More than
560 mm
220 mm
(22 inches)
(8-3/4 inches)
Extreme dust
Blocked ventilation slots
An unstable surface
Connection to extension cords or
multiple adapters
GETTING READY
Minimum of
50 mm
(2 inches)
589 mm
(23-1/4 inches)
More than
350 mm
(13-3/4 inches)
25
1

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: