Brother 884-T13 Operation Manual page 273

f Lift out the sweat guard on the inside of the
cap, and then place the cap over the cap
frame.
Using both hands, hold both sides of the cap, and then
align the edge of the lower frame with the base of the
brim.
1 Edge of the lower frame
2 Sweat guard
3 Base of the brim
At the same time, align the center line of the cap with
the centerline of the sweat guard holder on the cap
frame, and then slide the sweat guard under the sweat
guard holder.
1 Sweat guard holder
2 Center line of sweat guard holder
3 Center line of cap
g Align the center line of the cap with the
notch in the mounting jig.
1 Center line of cap
2 Notch in mounting jig
h Before closing the clamping frame, push the
ends of the sweat guard into the cap to
move them away from the hinge and latch
of the clamping frame.
1 Hinge of clamping frame
2 Fold the sweat guard as shown.
• Neatly folding the sweat guard before closing the
clamping frame helps prevent wrinkles in the cap.
i Close the clamping frame so that the brim
of the cap passes between the inside
clamping frame and the outside clamping
frame.
1 Brim of the cap
2 Inside clamping frame
3 Outside clamping frame
j Neatly align the teeth of the clamping frame
with the base of the brim.
1 Teeth of outside clamping frame
2 Base of brim
APPENDIX
7
271