Using The Optional Bobbin Winder; Precautions; Optional Bobbin Winder And Its Accessories - Brother 884-T13 Operation Manual

Using the Optional Bobbin Winder

When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures
for using the optional bobbin winder are described below.

Precautions

For precautions concerning the power supply, refer to page 32.
• Be sure to place the bobbin winder on a level, stable surface.
• Only use the bobbins supplied with this bobbin winder.

Optional bobbin winder and its accessories

Check that the following bobbin winder and accessories are included.
1.
1 Main power switch
2 Bobbin winder shaft
3 Hole for thread guide
4 Hole for spool pin
5 DC input connector
No. Name
1 Bobbin winder
2 Spool pin
3 Spool cushion
4 Thread guide
5 AC adapter*
* Visit your authorized Brother dealer.
Memo
• The part code of the bobbin winder set may differ depending on the country/area where the machine
was purchased.
• Depending on the model you purchased, the bobbin winder may be included with the machine.
CAUTION
2.
5.
6. 7.
Part Code
PRBW1
XC5949-051
XA0679-050
XC6644-151
–
3.
8.
No. Name
6 Power supply cord*
7 Metal bobbin × 5
8 Spool cap
9 Weight (L)
10 Weight (S)
APPENDIX
4.
9.
10.
Part Code
–
100376-051
130012-054
XC5974-151
XC6631-051
279
7