Setup Location - Brother 884-T11 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Setup location

Set up the machine in a location that meets the following requirements.
• Position the machine a minimum of 50 mm (2 inches) away from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk or stand.
• Use a surface that can support the weight of the machine (about 42 kg (92 lb))
• Allow open space around the ventilation slots found on the rear underside of the machine
CAUTION
●
In order to prevent malfunctions or damage, do not set up the machine in a location
exposed to the following conditions.
Objects within the moving range of
Extremely high or extremely low
environment should be between
5 °C (40 °F) and 40 °C (104°F).
● For your safety: Since the machine weighs approximately 42kg (92 lb), do not set it up on an
unstable table or desk.
785 mm
(31 inches)
Direct sunlight
Insufficient space
the embroidery frame
temperatures. The operating
Note
More than
210 mm
(8-1/4 inches)
Liquids, such as water Extreme dust
560 mm 220 mm
(22 inches) (8-3/4 inches)
Blocked ventilation slots
An unstable surface
Connection to extension
cords or multiple
adapters
Setting Up the Machine 27
1
Minimum of
50 mm
(2 inches)
589 mm
(23-1/4 inches)
More than
350 mm
(13-3/4 inches)