Table of Contents
Advertisement
Using the included embroidery
positioning sticker
Using the camera built into this machine and the
included embroidery positioning stickers, the
embroidering position can easily be aligned.
a
Affix an embroidery positioning sticker to
the fabric at the desired embroidering
position. Align the center of the large circle
in the embroidery positioning sticker with
the center of the embroidery pattern.
1 Embroidery positioning sticker
2 Center of embroidery pattern
3 Embroidering area
Note
• When hooping the fabric in the embroidery
frame, make sure that the embroidery
pattern will fit within the embroidering area
of the frame being used.
1 Embroidering area
2 Embroidery pattern size
3 Embroidery positioning sticker
• Depending on the type of fabric to be used,
it may not be possible to easily remove the
embroidery positioning sticker. Before
affixing the embroidery positioning sticker,
check how easily the sticker can be
removed by affixing it to a scrap of the
same type of fabric.
108
b
In the embroidering settings screen, touch
.
c
When the following message appears, touch
.
d
From the areas displayed in the LCD, touch
the area containing the embroidery
positioning sticker to select it.
Note
• The built-in camera may not be able to
detect the embroidery positioning sticker if
the four corners of the sticker are not firmly
affixed to the fabric. Use tape to firmly affix
the sticker to the fabric.
Advertisement
Table of Contents
Troubleshooting
