Maximum Sewing Speed Setting - Brother 884-T13 Operation Manual

Maximum Sewing Speed Setting

The maximum sewing speed can be set to one of seven levels at every 100 spm between 400 and 1000
spm. If Cap frame, Cylinder frame or Clamp frame is used, the maximum sewing speed can be set to one
of five levels at every 50 spm between 400 and 600 spm.
Maximum sewing speed
Embroidery frame/Flat
frame/
Round frame/
or other frames
1 1000
2 900
3 800
4 700
5 600
6 500
7 400
The maximum sewing speed setting is specified
from the embroidering screen.
When the embroidery machine is purchased, the
maximum sewing speed is set to 1000 spm (Cap
frame, Cylinder frame or Clamp frame for 600
spm).
For the types of embroidery frames, refer to "Types
of embroidery frames/frame holders and their
applications" on page 89.
a To increase the sewing speed, touch
decrease the sewing speed, touch
→ The value beside
Cap frame/
Cylinder frame/
Clamp frame
1 600
2 550
3 500
4 450
5 400
– –
– –
. To
.
and changes.
EMBROIDERING SETTINGS
Memo
• You can also specify a maximum sewing
speed to a certain needle bar in the
reserved needle bar settings (refer to
page 144). When you set the slower sewing
speed to a certain needle bar, the sewing
speed set with the procedure described in
this page, will not change the sewing speed
on the balance of the needles. It changes
the speed of the reserved needle.
• Decrease the sewing speed when
embroidering on thin, thick or heavy fabrics.
In addition, the machine embroiders more
quietly at a slower sewing speed.
• The sewing speed can be changed while
embroidery is being sewn.
• The maximum sewing speed setting does
not change until a new setting is selected.
The setting specified before the machine is
turned off remains selected the next time
that the machine is turned on.
• Decrease the sewing speed to 400 spm,
when using a weak thread like a metallic
thread.
4
139