Table of Contents
Advertisement
Embroidering linked characters
Follow the procedure described below to
embroider linked characters in a single row when
the pattern extends beyond the embroidery frame.
Example: Linking "DEF" to the characters "ABC"
a
Select the character patterns for "ABC".
b
In the embroidering settings screen, touch
.
c
Touch
.
→ The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
Note
• To cancel the starting point setting and
return the starting point to the center of the
pattern, touch
• Use
to select a different starting
point for embroidering.
d
Touch
to return to the embroidering
settings screen, and then touch
continue to the embroidering screen.
→
changes to
in the lower-left corner of the pattern.
.
to
while the starting point is set
EMBROIDERING SETTINGS
e
Touch
, and then press the start/stop
button to begin embroidering.
f
After the characters are embroidered, cut
the threads, remove the embroidery frame,
and then attach the embroidery frame again
so that the remaining characters ("DEF")
can be embroidered.
1 End of the embroidering
a
g
As in step
, select the character patterns
for "DEF".
h
In the embroidering settings screen, touch
.
i
Touch
.
→ The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
j
Touch
.
4
137
Advertisement
Table of Contents
Troubleshooting
