Download  Print this page

About The Maintenance Message - Brother 884-T13 Operation Manual

Hide thumbs


■ Oiling the needle bars
From embroidering screen, select one needle bar at
a time. (Refer to page 63 for needle bar screen). Turn
the handwheel counterclockwise bringing the
needle bar to its lowest position. Put one drop of oil,
as high as possible on the needle bar above the felt
1 Apply oil here.
• Too much oil may drip onto sewing project.
• Put a drop of oil onto the hook once a day
before use.
• Apply one drop of oil on the lower needle
bar above the felt washer every 40 – 50
hours of sewing time.
• Apply only sewing machine oil. Use of any
other type of oil may result in damage to the
embroidery machine.
• Do not apply too much oil. Fabric or thread
may get contaminated. If too much oil is
applied, wipe off any excess with a rag.
• If the thread breaks while sewing or the
operating noise of the hook becomes loud,
apply oil onto the race hook.

About the maintenance message

Once this message appears, it is recommended to
take your machine to your nearest authorized
Brother dealer for a regular maintenance check.
Although this message will disappear and the
machine will continue to function once you touch
, the message will display several more times
until the appropriate maintenance is performed.
Please take the time to arrange for the
maintenance that your machine requires once this
message appears. Such steps will help to ensure
you receive continued, uninterrupted hours of
machine operation for the future.


Table of Contents


   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: