Download  Print this page

12. Removing The Embroidery Frame And Fabric; Removing The Embroidery Frame; Removing The Fabric - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

12. Removing the Embroidery Frame and Fabric

After sewing is finished, remove the embroidery frame, and then remove the fabric from the frame.

Removing the embroidery frame

CAUTION
• When removing the embroidery frame, make
sure that the start/stop button is lit in red. If
the start/stop button is flashing in green, the
machine may start sewing. If the machine
accidentally starts operating, injuries may
result.
• When removing the embroidery frame, be
careful that the embroidery frame does not hit
any other part of the machine.
• Do not lift up the embroidery frame holder
with extreme force, otherwise it may be
damaged.
a
With both hands, grab the left and right
sides of the arms of the embroidery frame
holder, and then slightly lift up the frame.
The pins on the arms of the embroidery frame holder
should come out of the holes in the sides of
embroidery frame.
b
Pull off the embroidery frame toward you.
68

Removing the fabric

a
Loosen the outer frame screw.
→ If the screw was tightened using a disc-shaped
screwdriver, use the included disc-shaped
screwdriver to loosen it.
b
Remove the outer frame, and then remove
the fabric.

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: