Download  Print this page

Advertisement

Error messages

If the start/stop button is pressed while the machine is not correctly set up or if an incorrect operation is
performed, the machine stops and informs you of the error with a buzzer and an error message. If an error
message appears, correct the problem according to the instructions in the message.
To close the message, touch
appears again, consult your nearest authorized Brother dealer.
Some malfunction occurred.
When embroidering the pattern for the
optional jumbo frame, the machine
failed to find the positioning mark.
Follow the procedure from step
page 260, again.
or perform the correct operation, then touch
There are too many characters in the
curved text arrangement for the
selected embroidery frame.
Change the text arrangement or the
embroidery frame.
Machine failed to recognize the
embroidery positioning mark.
Confirm that the embroidery positioning
h
on
mark is in the selected area. If problem
persists, reposition the mark.
APPENDIX
. If the message
Machine cannot receive any data from
the PC in the Link mode.
Turn off the machine, and check the
USB connection. After connect the USB
cord securely, turn on the machine
again. (Refer to page 169)
When in camera mode by touching
, some keys are unavailable.
Touch
to cancel the camera mode
to activate the key.
7
299

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: