Brother 884-T13 Operation Manual page 61

d Pass the thread through the hole in the
number 1 upper thread guide and pull the
thread toward you.
1 Hole in upper thread guide
e Hold the thread with both hands, and then
pass it under the guide plate from the right.
1 Upper thread guide plate
EMBROIDERING TUTORIAL
f Wind the thread clockwise once around the
number 1 thread tension disc.
1 Thread tension disc
2 Pass thread in a clockwise direction at this
location on the tension disks.
• Make sure that the thread is securely positioned in the
thread tension.
Note
• All thread tension discs are threaded in
clockwise direction.
Lead the thread along the thread path and
g
around the correct thread guide pins as
indicated on the machine, then slip the
thread under the number 1 middle thread
guide plate from the right.
1 Thread guide pin
2 Middle thread guide
• The path from the upper thread guide around the
thread tension disc and to the middle thread guide
f g
(steps through
spool number. Passing the thread through the thread
guide pins is designed to prevent the thread from
becoming tangled. Be sure to follow the thread path
indicated on the machine.
) may differs depending on the
59
2