Download  Print this page

Cleaning The Bobbin Case - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

f
Attach the needle plate in the opposite way
that it was removed in step
close the hook cover.
1 Needle plate

Cleaning the bobbin case

Thread wax and dust easily collect around the
hole in the tension-adjusting spring on the bobbin
case, resulting in an incorrect thread tension.
Therefore, it should be cleaned each time when
the bobbin is changed.
Use a piece of paper with the thickness of a
business card.
a
Open the hook cover, remove the bobbin
case, and then remove the bobbin. (Refer to
page 36.)
286
b
b
, and then
c
d
Slide the paper under the tension-adjusting
spring to remove any dust.
Use a corner of the paper to remove any dust from
around the hole.
1 Tension-adjusting spring
2 Hole
3 Paper
Note
• Do not bend the tension-adjusting spring. In
addition, do not use anything other than
thick paper or paper of the specified
thickness to clean the bobbin case.
Use the included cleaning brush to remove
any lint and dust from inside the bobbin
case.
After cleaning is finished, insert the bobbin
into the bobbin case and the bobbin case
into the hook, and then close the hook
cover. (Refer to page 36, 37.)

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: