Oiling The Machine - Brother 884-T13 Operation Manual

Oiling the machine

In order to extend the life of the embroidery
machine's parts and keep the machine operating
correctly, be sure to oil the machine before the
first time that it is used. If too little oil was applied
to the race, an error message may appear.
Afterward, put a drop of oil onto the hook once a
day before use, and put a drop of oil to the lower
needle bar felt washer every 40 to 50 hours of
machine use.
■ Oiling the race
a Touch .
b Touch .
→ Following message appears.
c Open the hook cover, and remove the
bobbin case. (Refer to page 36, 37.)
Touch .
d
→ The race moves to the correct position for oiling.
288
e Put a drop of oil onto the hook.
Front angle view
1 Punch a small hole in oil bottle.
2 Apply oil here.
• Use a pointed object to punch a small hole in the tip
of the included oiler before using it.
f Touch appeared in the following
screen.
→ The race backs to its original position.
g After oiling, insert the bobbin case into the
hook, and then close the hook cover. (Refer
to page 37.)
Side view