Table of Contents
Advertisement
f
Use
to align the pattern with the
desired embroidery position.
• The pattern can be moved to the desired position by
using your finger or the touch pen to drag the
pattern displayed on the screen.
Memo
• If necessary, touch
in order to check the pattern position.
The background can be displayed or hidden
by touching
settings screen.
g
Press
to display the embroidering
settings screen.
Memo
• The pattern can also be aligned from the
embroidering settings screen.
to display a preview
in the embroidering
OTHER BASIC PROCEDURES
h
Press
to start embroidering.
→ When embroidery is finished, the fabric displayed in
the background disappears.
Whether or not the fabric is displayed in the
background can be specified from page 7 of the
settings screen. In addition, "Standard" or "Fine" can
be selected for the quality of the background image.
1 Set to "ON" to leave the fabric displayed in the
background.
2 When set to "OFF", the background will
disappear.
3 Select the quality of the background image.
4 Touch
to remove the background image
completely.
Note
• If the embroidery is not sewn, the fabric
background will remain on the screen.
On page 7 of the settings screen, touch
to erase the background image.
■ Saving the background image to USB
media
By touching
, the background image can be
saved to USB media.
a
Refer to "Displaying the fabric while
aligning the embroidery position" on
page 102 to scan a background image.
b
Insert the USB media into the USB port.
c
Select the USB port (
want to save to.
d
Select the USB media where the image is to
be saved.
→ The background image is saved to the USB media.
1
2
3
4
3
or
) that you
103
Advertisement
Table of Contents
Troubleshooting
