Correctly Using The Embroidery Frames; Embroidery Frame Holders; When Difficult To Replace The Embroidery Frame - Brother 884-T13 Operation Manual

Correctly Using the Embroidery Frames

Various types of embroidery frames can be used with this machine to suit your project.
In addition to the four included embroidery frames, there are many frames that can be used with this
embroidery machine. (Refer to "Optional Accessories" on page 22.)
• Only use embroidery frames of the sizes indicated in the screen, otherwise the embroidery frame may hit
the presser foot, which may result in injuries.

Embroidery frame holders

Two types of embroidery frame holders
(embroidery frame holder A and embroidery frame
holder B) are included with this machine.
Embroidery frame holder A is used with the four
included embroidery frames. Embroidery frame
holder B is used with the optional embroidery
frames. In addition, if you purchase optional round
frame set, clamp frame set or compact frame set,
specified frame holder C, D or E is included. For
details on which embroidery frame can be
installed on each embroidery frame holder, refer to
"Types of embroidery frames/frame holders and
their applications" on page 89.
1 Embroidery frame holder A
2 White corner covers
3 Embroidery frame holder B
4 Light gray corner covers
5 Magnet
6 Embroidery frame holder C (optional)
7 Dark gray corner covers
8 Embroidery frame holder D (optional)
9 Embroidery frame holder E (optional)
88
CAUTION
When difficult to replace the
embroidery frame
Depending on the position of the needle bars, it
may be difficult to replace the embroidery frame.
In that case, follow the procedure described below
to move the embroidery frame.
a Touch
→ The needle bar move screen appears.
b Touch
→ The carriage automatically moves to a position
where the embroidery frame can easily be replaced.
• Touch
and to move the carriage to the previous position.
.
.
to close the needle bar move screen