Table of Contents
Advertisement
f
Touch
to check the needle drop point
on the LCD screen.
→ The camera view window appears.
• Touch
to zoom up the camera view twice the
size of normal view.
g
Touch
two or three times to go back
two or three stitches.
1 Each touch of this key moves one stitch back
through the stitching.
• Check that the needle drop point is positioned where
stitches have already been sewn.
h
Touch
.
i
Touch
→ The embroidering screen appears again.
j
Touch
button to continue embroidering.
Memo
• The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued. The machine
can also be set to stop when the thread
color is changed. (For details, refer to
"Setting the Machine to Stop at Color
Changes" on page 140.)
1
OTHER BASIC PROCEDURES
.
, and then press the start/stop
3
123
Advertisement
Table of Contents
Troubleshooting
