Download  Print this page

Remove The Fixing Plates; Adjusting The Operation Panel Position - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

Remove the fixing plates

CAUTION
• Remove the fixing plates before turning on the
machine, otherwise the machine may
malfunction.
a
Using the included Phillips screwdriver,
remove each of screws on the fixing plates.
1 Screws
2 Fixing plates
Memo
• After removing the fixing plates, be sure to
keep them to be used again. Before
transporting the machine, consult your
authorized Brother dealer.
Adjusting the operation panel
position
Adjust the orientation and angle of the operation
panel so it can easily be operated.
a
Loosen 2 thumb screws to bring the
operation panel forward.
1 Thumb screws
b
Adjust the operation panel to an easy-to-
operate position, and then tighten the
thumb screws.
c
Adjust the orientation of the operation
panel.
Loosen the thumb screw, adjust the operation panel to
an easy-to-view orientation, and then tighten the
thumb screw.
1 Thumb screw
GETTING READY
1
27

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: