Download  Print this page

Advertisement

■ Golf Style
1 Face: Not divided
2 5 sections
Otto
International,
Inc. cap model
OTTO37-024
number
(Example)
Mesh backing on
the back of front
Constructed firm
panels
front
(soft or hard)
Ease of framing
Fairly easy
(hooping)
Backing
1 to 2 ply
Memo
• Check if this area 1 is covered with mesh.
Note
• There is no centerline that can be used as a
guide for placing the cap in the cap frame.
Before framing the cap, use a charcoal pen
to mark the centerline.
■ Cap fabric not recommended for
embroidering
• Caps with a front panel that is less than 50 mm (2
inches) high (such as a sun visor)
• Children's caps
• Caps with a brim that is longer than 80 mm (3-1/16
inches)
264

Fabric precautions

■ Cap fabric recommended for
embroidering
• 35%Cotton / 65%Polyester
• 100%Cotton
• 80%Wool / 20%Nylon
• 15%Wool / 85%Acrylic
■ Cap fabric not recommended for
embroidering
If caps of the following types of fabric are used, they
will be very difficult to frame, easily wrinkled, or
easily shrink.
• Polyester Foam
• Stretch material
• Melton Wool
• 100%Nylon
• Suede

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: