Table of Contents
Advertisement
d
After making the desired changes, touch
.
→ The pattern editing screen appears again.
CAUTION
• After changing the angle of the pattern, check
the icons for the embroidery frames that can
be used and use only the indicated frames. If a
frame other than those indicated are used, the
presser foot may hit the embroidery frame and
cause injuries.
Memo
• If
in the embroidering settings screen
is used, the entire combined pattern can be
rotated. (For details, refer to "Rotating the
entire pattern" on page 201.)
• If the pattern is too large or the pattern is
too close to the edge of the embroidery
field, all of the rotating options may not
apply.
Changing the text arrangement of
a character
Characters can be arranged on a horizontal line,
on a slant or on an arc.
a
Touch
.
→ The screen shown below appears.
• For details on each key, refer to "Changing the text
arrangement" on page 158.
b
Touch the key of the desired text
arrangement.
SELECTING/EDITING/SAVING PATTERNS
c
After selecting the desired text
arrangement, the bend of the curve can be
adjusted. If necessary, touch
to adjust the bend of the curve.
Memo
• When selecting
change to
increase or decrease the incline.
d
If necessary, touch the arrow keys to adjust
the position of the pattern.
(For more details, refer to page 176.)
e
After making the desired changes, touch
.
→ The pattern editing screen appears again.
Memo
• The text arrangement specified when the
character was selected on page 158 can be
changed at this point.
Changing the character spacing
The spacing between the characters can be made
wider or narrower.
a
Touch
.
→ The character spacing screen appears.
and
,
and
and
. You can
181
5
Advertisement
Table of Contents
Troubleshooting
