Download  Print this page

Advertisement

n
Adjust the brim so that it maintains a
rounded shape.
o
While pulling the lever toward you that is
located behind the handle on the right side
of the mounting jig, rotate the cap frame to
the left. After the cap frame has been
rotated 90°, release the lever to lock the
cap frame in place.
1 Handle
2 Lever
p
Pull the ends of the cap out from the center
to remove any slack.
q
Use the clips to secure the cap.
Attach the clips with their handles folded inward. If the
handles are pointed outward, they may be hit by the
machine's presser foot.
1 Clips
r
While pulling the lever toward you that is
located behind the handle on the right side
of the mounting jig, rotate the cap frame to
the right.
After the cap frame has been rotated 180° and the
brim points to the right, release the lever to lock the
cap frame in place.
1 Handle
2 Lever
s
Pull the ends of the cap out from the center
to remove any slack in the same way as the
other side.
APPENDIX
7
273

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: