Setup Location; Setting Up The Machine - Brother 882-T52 Operation Manual

Setup location

Dimensions of machine 506 mm (W) × 587 mm (D) × 747 mm (H)
(Approx. 20-59/64 inches (W) × 23-7/64 inches (D) × 29-13/32 inches (H))
* When installing this machine, secure a space of at least 35 cm (approx. 13-25/32 inches) from the front of
the machine, at least 5 cm (approx. 2 inches) from the rear, and at least 15 cm (approx. 6 inches) from the
left and right sides.
• Allow sufficient space around the machine.
• Place no objects within the moving range of the embroidery frame.
• Set-up machine near an electrical outlet.
• Use a level and stable surface, such as a desk or stand.
• Use a surface that can support the weight of the machine.
• Allow open space around the ventilation slots at the back and on the rear underside of the machine.

Setting up the machine

a
1 Loosen the lock nut using the
included wrench.
b
2 Turn the adjustable foot nut with the
included wrench.
1 Lengthens the leg.
2 Shortens the leg.
c
3 Tighten the lock nut after
adjusting the legs.
13