Setup Location - Brother 884-T05 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Setup location

Setup the machine in a location that meets the following requirements.
• Position machine more than 50 mm (2 inches) from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk
• Use a surface that can support the weight of the machine (about 37 kg (81 lb))
• Allow open space around the ventilation slots found on the rear underside of the machine
CAUTION
●
In order to prevent malfunctions or damage, do not set up the machine in a location
exposed to the following conditions.
Objects within the moving range of
Extremely high or extremely low
environment should be between
5 °C (40 °F) and 40 °C (104°F).
● For your safety: Since the machine weighs approximately 37 kg (81 lb), do not set it up on an
unstable table or desk.
770 mm
(30-5/16
inches)
Direct sunlight
Insufficient space
the embroidery frame
temperatures. The operating
Note
More than 512 mm
250 mm (20-5/32 inches)
(9-7/8 inches)
Liquids, such as water Extreme dust
More than
50 mm
(2 inches)
589 mm
(23-3/16 inches)
More than
350 mm
(13-3/4 inches)
More than
250 mm
(9-7/8 inches)
Blocked ventilation slots
An unstable surface
Connection to extension
cords or multiple
adapters
Setting Up the Machine 25
1