Download  Print this page

Using A Frame Pattern To Create Appliqués (1) - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

f
After attaching the appliqué piece, sew an
"APPLIQUE" pattern. The appliqué is
finished.
• Depending on the pattern, an "APPLIQUE" pattern
may not be available. In this case, sew the appliqué
using thread in the color of a part of the embroidery.
g
Finish sewing the embroidery.
Using a frame pattern to create
appliqués (1)
Appliqués can be created by sewing two frame
patterns of the same size and shape—one sewn
with straight stitches and the other sewn with satin
stitches.
a
Select a frame pattern sewn with straight
stitches to embroider onto the fabric for the
appliqué. Carefully cut outside of the
stitching.
b
Embroider the same pattern on the base
fabric.
c
Lightly apply fabric glue or spray adhesive
to the back of the appliqué piece that was
a
cut out in step
appliqué piece to the base fabric.
d
Select the satin-stitched frame pattern with
the same shape to embroider the appliqué
c
attached in step
1 Appliqué
Note
• If the size or sewing position of the straight-
stitched frame pattern is changed, be sure
to change the size or sewing position of the
satin-stitched frame pattern in the same
way.
APPENDIX
, and then attach the
.
241
7

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: