Temporary Needle Bar Setting; Uninterrupted Embroidering (Monochrome) - Brother 884-T13 Operation Manual

Temporary Needle Bar Setting

After embroidering begins, the machine can be stopped at a color change and a different needle bar can
be specified for the next color to be sewn.
By substituting an upper thread color already threaded on a different needle bar, the time for sewing can
be saved. For example, similar color thread can be substituted for temporary use.
a Touch .
→ The temporary needle bar setting screen appears.
b Touch the key for the needle bar threaded
with the thread that you wish to embroider
with.
→ The needle bar number changes and
indicate the selected needle bar.
→ To cancel the setting, touch
c Touch .
→ The embroidering screen appears again.
Memo
• The thread color (needle bar) cannot be
changed in the middle of an area that is
being sewn.
142
Uninterrupted embroidering
(monochrome)
A selected pattern can be stitched out in one color
instead of multicolor. The machine will hesitate
but not stop between color steps, and then
continue till the pattern is completed.
a Touch the key for the needle bar threaded
with the thread you wish to embroider
uninterruptedly.
b Touch
become shaded and the selected pattern
appears to
will embroider in a single color, instead of
changing the thread while embroidering.
.
→ The thread color displayed on the screen will be
• Touch
for the multicolor steps to
grayed out.
again to return to the pattern's original
settings.
Memo
• Even if uninterrupted embroidering has
been set, the DST thread trimming function
can be used (refer to page 227).
• After finishing the embroidery, uninterrupted
embroidery will be canceled.