Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media - Brother 884-T13 Operation Manual

Upgrading Your Machine's Software

You can use USB media or a computer to download software upgrades for your embroidering machine.
When an upgrade program is available on " http://support.brother.com ", please download the files
following the instructions on the website and steps below.
You can use USB to download software upgrades/updates (**********.upf) for your sewing machine.
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used for this upgrade.
Upgrade procedure using USB
media
a While pressing the automatic threading
button, turn the main power to on.
→ The following screen will appear on the LCD.
b Touch .
c Insert the USB media into the USB port on
the machine. The media device should only
contain the upgrade file.
1 USB port
2 USB media
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
d Touch .
→ The upgrade file is downloaded.
Note
• If an error occurs, a red text error message
will appear. When the download is
performed successfully, following message
will appear.
Remove the USB media, and turn the
e
machine off and on again.
APPENDIX
7
309