Setup Location - Brother PR-600 Manual

Sapphire.book Page 7 Friday, August 1, 2003 9:12 AM

Setup location

Setup the machine in a location that meets the following requirements.
• Position machine more than 50 mm (2 inches) from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk
• Use a surface that can support the weight of the machine (about 37 kg (81 Ibs.))
• Allow open space around the ventilation slots at the bottom toward the back
CAUTION
●
In order to prevent malfunctions or damage, do not set up the machine in a location exposed
to the following conditions.
Direct sunlight
Objects within the
moving range of the
embroidery frame
Insufficient space
Extremely high or extremely low temperatures (The operating
environment should be between 5 °C (40 °F) and 40 °C (104°F)
770 mm
(30-5/16 inches)
More than 512 mm
250 mm (20-5/32 inches)
(9-7/8 inches)
Liquids, such as water
Extreme dust
An unstable surface
More than
50 mm
(2 inches)
589 mm
(23-3/16 inches)
More than
350 mm
(13-3/4 inches)
More than
250 mm
(9-7/8 inches)
Blocked ventilation
slots
Connection to extension
cords or multiple
adapters
Setting Up the Machine
1
7