Brother 884-T13 Operation Manual page 261

c Check the size of the pattern, and then
hoop fabric that is large enough in the
optional jumbo frame.
* For details on attaching the optional jumbo frame,
refer to "Hooping the Fabric" on page 93.
Note
• When hooping the fabric, position it within
the embroidery frame so there is at least 10
mm of space to the inside of the frame.
1 more than 10 mm (3/8 inch)
2 Location where the pattern is to be embroidered
d Attach the jumbo frame to the machine.
e Touch .
Note
• When you change the embroidering
position using the jumbo frame, be sure to
be aware of the size of the combined
pattern. You cannot change the position
exceeding the embroidery area.
1 Embroidery area
f Touch , and then press the start/stop
button to start embroidering the first
section of the pattern.
g After embroidering of the first section of
the pattern is finished, the following
message appears. Touch
APPENDIX
.
7
259