Download  Print this page

Additional Digitizing Information - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

f
Align the holes on the embroidery frame
holder with the pins in the frame-mounting
plate of the carriage.
1 Pins in the frame-mounting plate
2 Holes on the embroidery frame holder
g
Secure the embroidery frame holder with
the two thumb screws.
1 Use the thumb screws included with the machine
(thumb screws removed in step
CAUTION
• Using the disc-shaped screwdriver included,
firmly tighten the thumb screws.

Additional digitizing information

When creating a pattern for embroidering with a
cap frame, pay attention to following points in
order to avoid registration problems (misalignment
of gaps in the pattern).
a
b
a
on page 265).
Sew underlay stitches.
Start the embroidery pattern from the
center, and sew toward the ends.
With the machine, the order in which patterns are
selected when they are combined is the order in which
they will be sewn. For the following example, select
the patterns in the order "E"
make the combined pattern "BEAR".
Incorrect
sewing
order
Correct
sewing
order
Note
• Do NOT sew from one end to the other,
otherwise wrinkling or shrinking may occur.
APPENDIX
"A"
"B"
"R" to
277
7

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: