Using The Camera To Connect Patterns; Connecting Three Patterns - Brother 884-T13 Operation Manual

Using the Camera to Connect Patterns

Instead of using thread marks, the camera can be used to connect patterns.
An area of 17 cm × 33 cm (6-1/2 inches × 13 inches) can be embroidered when the camera is used to
connect patterns. Select the appropriate frame depending on the size of the embroidery. We recommend
using the large embroidery frame (200 mm × 360 mm (7-7/8 inches × 14 inches)) when using the camera
to connect patterns.
Note
• When installing the embroidery frame
(small) (40 mm × 60 mm (1-1/2 inches ×
2-3/8 inches), cap frames, cylinder frame,
sleeve frame, clamp frames, name frame or
the round frames, you can not connect
patterns using this function.
• Split (Large-size) embroidery patterns
cannot be used with this function.
• You can not connect patterns using this
function while the machine is set to the Link
mode.

Connecting three patterns

Example:
1 Pattern A
2 Pattern B
3 Pattern C
Select the first pattern A, and then touch
a
.
206
b Hoop fabric in the large embroidery frame
(13 cm × 18 cm (5-1/8 inches × 7-1/8
inches)), and then attach the frame to the
embroidery machine.
c Press to display the embroidering
settings screen. Touch
embroidering settings screen.
• needs to be selected in order to continue
connecting patterns.
→
appears at the bottom left side of the screen,
and then changes to
Memo
• A pattern cannot be saved in the machine's memory
while patterns are being connected.
in the
.