Stopping Embroidering - Brother 884-T13 Operation Manual

■ Continuing embroidering
To sew the same pattern again, touch
→ The embroidering screen appears so the same
pattern can be sewn again.
To select a new pattern, touch
→ The pattern type selection screen appears.
Note
• Automatic Lock stitching can be set so that
it is sewn at the beginning of the
embroidery, when starting to sew after
changing thread colors, and when trimming
the thread. (Refer to "Automatic Lock Stitch
Setting" on page 134.)
• The sewing speed can be changed, even
while the pattern is being sewn. (Refer to
"Maximum Sewing Speed Setting" on
page 139.)
66

Stopping embroidering

.
The machine can be stopped during sewing.
■ Temporarily pausing
a
.
Press the start/stop button.
→ The machine stops and the start/stop button lights up
in red.
• Embroidering can also be stopped by touching an
area displaying the pattern.
• The thread is not trimmed.
• To continue sewing, after checking that the upper
thread is taut, touch the unlock key, and then press
the start/stop button.
Memo
• If the Reserve Stop key is touched while
embroidery is being sewn, the machine
stops sewing before the next color begins.
(Refer to "Stopping the machine at the next
color change" on page 140.)
• Before starting to sew, the machine can be
set to stop at any thread color change.
(Refer to "Specifying pause locations before
embroidering" on page 140.)