Download  Print this page

Using The Settings Key; Understanding The Settings Screen - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

Using the Settings Key

Touch
(settings key) to change many of the basic embroidery machine settings.

Understanding the settings screen

There are seven pages in the settings screen. Touch
desired page is displayed. The
■ Page 1
1
2
1 An image of the current settings screen can be
saved on USB media.
2 The settings on the page containing this key will
be reverted to their defaults.
3 The guides (centerpoint marker and grid) for the
pattern display area can be specified. (Refer to
page 223.)
4 Changing the thread color display
The color information in the thread color sequence
display and the needle bar thread information can
be switched to the color name, the thread brand
and color number or the sewing time. (Refer to
page 225.)
5 PES Thread Code
You can display the thread color for "PES" format
data according to the machine setting, or setting
from the embroidery editing software. (Refer to
page 226.)
6 Embroidery Background Color/Thumbnail
Background Color
Depending on the color of the embroidery,
changing the background color of the pattern
display area and thumbnails may make them more
visible and easier to select. (Refer to page 227.)
220
and
key appears on all pages.
■ Page 2
3
4
5
6
7 "DST" Setting
8 Short Stitch Delete
9 Thread Tail
0 Basting Distance
in the lower-center of the screen until the
Specifies whether or not jumpstitches are cut. In
addition, when using Tajima embroidery data
(.dst), you can specify whether or not the thread is
cut according to the specified number of jump
codes. (Refer to page 227.)
Specifies the length of short stitches that are to be
deleted. (Refer to page 228.)
Specifies the length of upper thread that remains
threaded through the needle after the thread is
trimmed (length of thread passed through the eye
of the needle). (Refer to page 228.)
Specify the distance between the pattern and the
basting stitching. (Refer to page 128.)
Note
• If the settings for ""DST" Setting" 7 or
"Short Stitch Delete" 8 are changed from
the previous setting, the new settings are
only applied to the next embroidery.
7
8
9
0

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: