Table of Contents
Advertisement
n
Sew the outline "APPLIQUE".
1 Outline of appliqué piece
o
After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
p
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
q
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
r
Dry the appliqué piece, and then iron it if
necessary.
Note
• Do not apply a strong force when ironing,
otherwise the stitching may be damaged.
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern, and then
clean off the glue.
EMBROIDERING SETTINGS
131
4
Advertisement
Table of Contents
Troubleshooting
