Changing The Screen Saver Image - Brother 884-T13 Operation Manual

Hide thumbs Also See for 884-T13:
Table of Contents

Advertisement

■ Changing the screen saver image

You can select your own personal images for the
screen saver of your machine.
Before changing the screen saver image, prepare the
image on your computer or USB media.
When the embroidery machine is purchased, the
default setting is selected.
The screen saver settings can be specified from page
4 of the settings screen.
Compatible image files
Format
JPEG format (.jpg)
File size
Max. 2 MB for each image
800 × 1280 pixels or less, (If the width is
more than 800 pixels, the image
File dimension
imported will be reduced to a width of
800 pixels.)
Number allowed
5 or less
Note
• When using USB media, make sure that it
contains only your own personal images to
be selected for the screen saver.
• Images saved on an SD card cannot be
selected for the screen saver. Use images
from the computer or USB media.
• Folders are recognized. Open the folder that
holds your personal images.
a
Touch
.
b
Touch
.
230
c
Connect the USB media or the computer
(using a USB cable) that contains your
personal image to the USB port of the
machine.
• Refer to page 81 about USB connectivity.
d
Touch
to select the first image.
• The images will appear in a list in this screen. Select
the desired number to specify the image.
e
Select the device that is connected.
• Touch
when connecting USB media to the top
USB port.
• Touch
when connecting USB media to the
center USB port.
• Touch
when connecting a computer using a
USB cable, and then copy your personal images into
"Removable Disk", which appears on the desktop of
the computer.
→ A list of your personal images appear on the screen.
• Touch
to delete the selected image.
• Touch
to return to the previous screen.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents