Flipping A Pattern Horizontally - Brother 884-T13 Operation Manual

1 Shows the vertical distance moved from center.
2 Shows the horizontal distance moved from center.
Memo
• If you wish to group combined patterns,
refer to "Grouping multiple selected
patterns" on page 176.
• To return the pattern to its position before it was
moved (center of the embroidery frame), touch
The pattern can also be moved by dragging it.
If a USB mouse is connected, move the mouse to
position the pointer on the desired pattern, and then
hold in the left mouse button while dragging the
pattern. The pattern can also be dragged by selecting it
directly in the screen with your finger or the touch
pen.
Memo
• The pattern can also be moved by touching
the arrow keys in the screens that appear
when any of the other editing keys are
touched.
• The arrow keys in the embroidering settings
screen are used to move the frame to select
the embroidering position.
• The pattern can also be moved to the
desired position by dragging it with your
finger.

Flipping a pattern horizontally

a Touch
1
2
→ The pattern is flipped horizontally.
• Each touch of the key turns the setting either on or off.
.
SELECTING/EDITING/SAVING PATTERNS
so that it changes to
Horizontal flip
Flipped horizontally
turned off
.
5
177