13. Turning Off The Machine - Brother 884-T13 Operation Manual

13. Turning OFF the Machine

After all embroidery is finished, turn off the machine.
a Set the main power switch to " ".
→ The embroidery machine is turned off and the
display and the start/stop button indicator goes off.
b Unplug the power supply cord from the
electrical outlet.
Grasp the plug when unplugging the power supply
cord.
c If necessary, unplug the power supply cord
from the machine.
Store the power supply cord in a safe place.
Note
• If a power outage occurs while the
embroidery machine is being operated, turn
off the embroidery machine and unplug the
power supply cord. When restarting the
embroidery machine, follow the necessary
procedure to correctly operate the machine.
(Refer to "2. Turning ON the Machine" on
page 38.)
EMBROIDERING TUTORIAL
Memo
• If the machine is turned off while it is
sewing, embroidering can continue when
the machine is turned on again. (Refer to
"Resume Embroidering After Turning Off the
Machine" on page 122.)
Turned off while
embroidering
Turned on
After the opening movie
2
69